Glass Apparatus for ASTM Test Methods

Water Cup

Designed to ASTM D473 and related specifications used for sediment
extraction. Manufactured from 33 expansion, low extractable borosilicate glass.

Part Number	Overall Hight (mm)	Overall Width (mm)	Case Qty
CS-D473	41	25	24

Sublimation Apparatus, Vacuum

For purifications by sublimation of quantities of about 0.5 to 500 mg, under
vacuum. Consists of a cylindrical, flat bottomed flask for sample and a
water cooled finger type condenser. The condenser has an outer short skirt
with a 24/25 outer joint to fit over the neck of the flask. Above the joint there
is a side hose connector for attachment to a source of vacuum.

Part Number	Height x Width (mL)	Qty
CS-MSA-01	160 x 85	1

Part Number	Description	Qty
CS-MSA-02	Lower flask only	1
CS-MSA-03	Cold finger condenser only	1

A clear glass tube with three different types of tubes.

Soxhlet Extraction Body

Used for continuous extraction of solids with a suitable solvent.

Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Overall Height (mm)	Standard Taper Joints: Top, Bottom	Case Qty
CS-SEB-S	270	34/45, 24/40	1
CS-SEB-M	300	45/50, 24/40	1
CS-SEB-L	340	55/50, 24/40	1

A clear glass tube with a blue sticker on it.

Short Cone Oil Centrifuge Tubes

Tube designed for field use in testing petroleum test method ASTM D 96 AND API Code 2500. Calibrated to contain.

Part Number	Graduation Intervals (mL)	Case Qty
CS-D96-6	0 to 5/10 in 5/100;	12
	0/5 to 2 in 1/10;
	2 to 3 in 2/10;
	3 to 5 in 5/10;
	5 to 10 in 1;
	10 to 25 in 5;
	and at 50, 100

A clear cone shaped glass container with blue label.

Sample Containers

This sample container is for use in the determination of the stability of gasoline under acceleration oxidation conditions.

The cover is intended to prevent material that is refluxing back into the bomb stem from contaminating the sample
Ref: ASTM D525

Part Number	Width (mm)	Case Qty
CS-D525	50	10

A clear glass jar with blue sticker on it.

Sample Beakers

Meets ASTM D2112 and D2272 specifications.

Item Number	Capacity (mL)	Max Weight (ASTM Requirement)	Case Qty
CS-D2112-2272	175	100 grams	10

ROUND BOTTOM SHORT NECK FLASK

Heavy wall round bottom short neck boiling flask with single standard taper outer joint
Ref: ASTM Method D322
Manufactured from 33 expansion, Low Extractable Borosilicate glass conforming to USP Type I and ASTM E438, Type I Class A requirements

Part Number	Capacity (mL)	Standard Taper Joint	Case Qty
CS-D320-100	100	14/20	1
CS-D320-250	250	14/20	1
CS-D322-100	100	19/22	1
CS-D322-250	250	19/22	1
CS-D322-500	500	19/22	1
CS-D340-100	100	24/40	1
CS-D340-250	250	24/40	1
CS-D340-500	500	24/40	1

Ramsbottom Coking Bulb

The Ramsbottom Coking Bulb is used in the determination of carbon residue in petroleum products.

Ref: ASTM D524
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Overall Height (mm)	OD (mm)	Case Qty
CS-D524	57	24min 25Max	25

Petrochemical Filter Stick Apparatus with Hooks and Springs

Apparatus used in the determination oil content and solvent extractable in petroleum waxes.
Assembly consists of a sintered glass filter stick with air pressure inlet tube and delivery nozzle and a cooling tube with 24/40 joints
Supplied with one pair of springs
Ref: ASTM D721
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Standard Taper Joints	Case Qty
CS-D721	24/40	1

A glass tube with a blue cap and some white tubes

Pear-Shaped Centrifuge Tubes with White Scale

Used in the determination of the bottom sediment and water in petroleum products.
Specified in ASTM method in D96.

Calibrated to contain
Stem diameter holds 1.5 mL

Part Number	Overall Height (mm)	Standard Taper Joints: Top, Bottom	Case Qty
CS-SEB-S	270	34/45, 24/40	1
CS-SEB-M	300	45/50, 24/40	1
CS-SEB-L	340	55/50, 24/40	1

A clear glass funnel with a blue sticker.

8" Oil Centrifuge Tubes

Can be used in the determination of residues in Liquified Petroleum (LP) gases. ASTM Method D96, D1796, and D91.

Part Number	Capacity (mL)	Graduation Intervals (mL)	Case Qty
CS-D96-8	100	0 to 5/10 in 5/100;	12
		5/10 to 2 in 1/10;
		2 to 3 in 2/10;
		3 to 5 in 5/10;
		5 to 10 in 1;
		10 to 25 in 5;
		25 to 100 in 25

A white plastic tube with blue writing on it.

Glass Sample Container (Heat Resistant Glass)

Ref: ASTM D2872

Item Number	Height x Width (mm)	Qty
CS-D2872	139 x 64	8

Friedrich Condenser with Hose Connection Sidearm

Friedrich condenser used primarily in reflux mode and soxhlet extractions.

Water inlet and outlet located above ring-sealed inner condensing tube
Standard Taper inner drip joint and side outlet for drying tube, etc
Molded inner spiral provides surface area for the condensation of the product
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Cold Finger Length (mm)	Standard Taper Joints	Case Qty
CS-FC-S	190	34/45	1
CS-FC-M	190	45/50	1
CS-FC-L	190	55/50	1

A clear tube with blue and white label on it.

Engler Distilling Flask

Sidearm tube is sealed at an angle of 75° from the neck and is 80.3mm +/-1.0mm from the top of neck to the bottom of the side arm seal
Designed from ASTM Specification E133 and intended for use in ASTM D86, D233, D801, and D802
Ref: ASTM Method D86
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Capacity (mL)	Arm OD (mm)	Case Qty
CS-D86-100	100	7	24
CS-D86-125	125	7	24
CS-D86-200	200	7	24
CS-D86-250	250	7	24

Cold Test Jar

Used to determine the temperature (cloud point) at which haziness is first observed at the bottom of the jar when petroleum oils are cooled and examined under specified conditions (ADTM D2500), and also the temperature at which chilled undisturbed oils will pour (ASTM D97).

Jar has a flat bottom and a reinforced bead at the open end
With a marking spot and a graduation ring located 54 mm from the inside bottom
Ref: ASTM Method D97, D2500
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Height (mm)	OD (mm)	Case Qty
CS-CTJ-D97	124	34	36

Bidwell-Sterling Moisture Test Distillation Receiver (Style E)

Bidwell-Sterling Designed for the determination of moisture in foods and organics.

Made to ASTM specifications E123
Also conforms to many methods of the American Oil Chemists Society
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Capacity (mL)	Subdivision (mL)	Case Qty
CS-E123-SE	5	0.05	1

Graduated Centrifuge Tubes ASTM D96

Used to determine the bottom sediment and water in petroleum.

Made in accordance with the specifications of the American petroleum institute (MPMS Chapter 10.4)

Graduation Intervals (%):	Tolerance (%)
0-3 in 0.2	0 to 1 - 0.10
	Above 1 to 2 - 0.15
3-10 in 0.5	Above 2 to 5 - 0.20
	Above 5 to 10 - 0.40
10-50 in 1	Above 10 to 25 - 0.50
At 100

Graduation Intervals (%):	Tolerance (%)
0-3 in 0.2	0 to 1 - 0.10
	Above 1 to 2 - 0.15
3-10 in 0.5	Above 2 to 5 - 0.20
	Above 5 to 10 - 0.40
10-50 in 1	Above 10 to 25 - 0.50
At 100	Above 25 - 1.00

Part Number	Capacity (%)	Case Qty
CS-D96	100 (12.5 mL)	12

A clear plastic tube with blue writing on it.

THREE VERTICAL NECK ROUND BOTTOM FLASK

Three-neck heavy wall round-bottom flask with standard Taper outer joints
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Ref: ASTM Method D1744

Item Number	Capacity	Joint	Case Qty
CS-D1744-100	100	24/40, 24/40	1
CS-D1744-250	250	24/40, 24/40	1
CS-D1744-500	500	24/40, 24/40	1
CS-D1729-250	250	29/42, 24/40	1
CS-D1729-500	500	29/42, 24/40	1

Three Vertical Neck Round Bottom Flask 8

Single Spherical Joint Neck Round Bottom Flasks

Single neck heavy wall flask with a spherical joint socket
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type l and ASTM E438, Type l, Class A requirements

Item Number	Capacity	Necks	Case Qty
CS-SS-RB-100	100ml	35/20	1
CS-SS-RB-250	250ml	35/20	1
CS-SS-RB--500	500ml	35/20	1

SINGLE SPHERICAL JOINT NECK ROUND BOTTOM FLASKS

HEAVY WALL 500ML DISTILLATION FLASK 3 NECKS CENTRAL 35/20 LATERALS 14/20

Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Ref: ASTM Method D1160

Part Number	Capacity	Necks	Laterals	Case Qty
CS-D1160-3N	500ml	35/20	14/20	1

HEAVY WALL 500ML DISTILLATION FLASK 3 NECKS CENTRAL 35_20 LATERALS 14_20

TWO VERTICAL NECK ROUND BOTTOM FLASKS

Distilling round bottom flask with two vertical necks
Two-neck heavy wall flask with standard taper outer joints on both vertical necks
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	Capacity	Standard Taper Joints: Center, Side	Case Qty
CS-RBT-24-250	250	24/40, 24/40	1
CS-RBT-24-500	500	24/40, 24/40	1
CS-RBT-29-500	500	29/42, 24/40	1

500ML DISTILLATION FLASK SPHERICAL JOINT 35/25 WITH THERMOWELL

Heavy wall, Distillation Flask, 500mL, w/Thermowell
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Ref: ASTM D1160
Note: also available in quartz

Part Number	Capacity	Joint	Case Qty
CS-D1160-ST	500ml	35/25	1

500ML DISTILLATION FLASK SPHERICAL JOINT 35_25 WITH THERMOWELL

Glass Heat Resistant Dish

Ref: ASTM D942
Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Part Number	OD x Height (mm)	Case Qty
CS-D942	41 x 8	12

Glass Apparatus for ASTM Test Methods

Water Cup

Water Cup

Sublimation Apparatus, Vacuum

Sublimation Apparatus, Vacuum

Soxhlet Extraction Body

Soxhlet Extraction Body

Short Cone Oil Centrifuge Tubes

Short Cone Oil Centrifuge Tubes

Sample Container

Sample Containers

Sample Beakers

Sample Beakers

Round Bottom Short Neck Flask

ROUND BOTTOM SHORT NECK FLASK

Ramsbottom Coking Bulb

Ramsbottom Coking Bulb

Petrochemical Filter Stick Appa

Petrochemical Filter Stick Apparatus with Hooks and Springs

Pear-Shaped Centrifuge Tubes With White Scale Ramsbottom Coking Bulb

Pear-Shaped Centrifuge Tubes with White Scale

8" Oil Centrifuge Tubes

8" Oil Centrifuge Tubes

Glass Sample Container

Glass Sample Container (Heat Resistant Glass)

Friedrich Condenser With Hose Connection Sidearm

Friedrich Condenser with Hose Connection Sidearm

Engler Distilling Flask

Engler Distilling Flask

Cold Test Jar

Cold Test Jar

Bidwell-Sterling Moisture Test

Bidwell-Sterling Moisture Test Distillation Receiver (Style E)

Graduated Centrifuge Tubes ASTM

Graduated Centrifuge Tubes ASTM D96

Three Vertical Neck Round Bottom Flask

THREE VERTICAL NECK ROUND BOTTOM FLASK

Single Spherical Joint Neck Round Bottom Flasks

Single Spherical Joint Neck Round Bottom Flasks

Heavy Wall 500ml Distillation Flask 3 Necks Central 35/20 Laterals 14/20

HEAVY WALL 500ML DISTILLATION FLASK 3 NECKS CENTRAL 35/20 LATERALS 14/20

Two Vertical Neck Round Bottom Flasks

TWO VERTICAL NECK ROUND BOTTOM FLASKS

500ml Distillation Flask Spherical Joint 35/25 With Thermowell

500ML DISTILLATION FLASK SPHERICAL JOINT 35/25 WITH THERMOWELL

Glass Heat Resistant Dish

Glass Heat Resistant Dish